eSATA 4Ports RAID !
Proven 1,500Mbps of Serial ATA External 4 Ports and RAID 0,
RAID 1, RAID 0+1, RAID 1+S(Mirrored-Sparing) to your system. |
|
|
RAID eSATA-150 External 4Ports PCI Host
|
| Item # |
SS-134e |
| Price: |
$46.98 |
| Ship Weight: |
1 lb. |
| Color: |
Red |
| Form Factor |
Low Profile |
| Chip Set: |
|
| OS: Support: |
Windows 98, Millennium, NT 4.0, 2000, XP, 2003 and Linux, Novell Netware |
| Driver: |
|
| FAQ: |
|
| In Stock: |
Yes |
| Compatibility: |
eSATA, RAID |
| Quantity Buy: |
Yes |
|
FEATURES:
- Four shielded and durable eSATA external connectors
- 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
- Four high speed Serial ATA interface ports, each supporting 1st generation Serial ATA data rates 1.5Gb/s
- Hot-plug capability
- Fully compliant with Serial ATA 1.5G specifications
- Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to multiple drives
- Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on two drives
- RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring
- RAID 1+S (Mirrored-sparing) can automatically replace the failed drive and rebuild the system when booting HDD is failed
|
MORE FEATURES:
- Supports ATAPI commands
- Supports Spread Spectrum in receiver
- Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes
- Compliant with PCI Specification, revision 2.2
- Integrated PCI DMA engines
- Four Pin header on board for LED connection
- 32 bit, 33/66MHz fully compliant PCI host interface
- Supports Windows 98, Millennium, NT 4.0, 2000, XP, 2003 and Linux, Novell Netware
- 32-bit CRC generation and checking for receive/transmit packets
- Acts as NON-RAID when BIOS not configured RAID
|
|
