Native SATA 4Ports RAID !
This PCI Host Adapter can upgrade your desktop computer to have four Serial ATA RAID Channels.
It can support Low profile PCI and regular size PCI both. The board provides a 32bit, 33/66
MHz PCI interface on the host side and fully compliant Serial ATA ports on the device side
to access Serial ATA Serial ATA storage media such as hard disk drive, ZIP drive, CD-ROM, CD-RW,
DVD-ROM.
|
RAID 0 (Striping), RAID 1 (Mirroring), RAID 0+1 (mirrored-stripping) and RAID 1+S (Mirrored-Sparing)
improve the data performance and provide the data redundancy and rebuilding
|
RAID Native SATA-150 4Ports Low Profile PCI Host
|
| Item # |
ST-114 |
| Price: |
$99.99 |
| Ship Weight: |
1 lb. |
| Color: |
Red |
| Form Factor |
Low Profile |
| Chip Set: |
Sil3114 |
| OS: Support: |
Windows 98, Windows Millennium, Windows NT 4.0, Windows 2000, XP, 2003 and Linux, Novell Netware |
| Driver: |
|
| FAQ: |
|
| In Stock: |
Yes |
| Compatibility: |
eSATA, SATAII |
| Quantity Buy: |
Yes |
|
FEATURES:
- Provides 2 Brackets to Support Low profile PCI and Regular size PCI in one card
- 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
- Hot-plug capability
- Four high speed Native Serial ATA interface ports, each supporting 1st generation Serial ATA data rates 1.5Gb/s
- Fully compliant with Serial ATA 1.5G specifications
- Supports Spread Spectrum in receiver
- Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes
- Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to 2 drives
- Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives
- RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring
- RAID 1+S (Mirrored-sparing) can automatically replace the failed drive and rebuild the system when booting HDD is failed
|
Specification:
- Supports ATAPI commands
- Supports Spread Spectrum in receiver
- Compliant with PCI Specification, revision 2.2
- Supports ATAPI commands
- Integrated PCI DMA engines
- Four Pin header on board for LED connection
- 32 bit, 33/66MHz fully compliant PCI host interface
- Supports Windows 98, Windows Millennium, Windows NT 4.0, Windows 2000, XP, 2003 and Linux, Novell Netware
- Acts as NON-RAID when not BIOS configured RAID
|
|
