Serial ATA II-3Gbps External 4Ports PCI-X card with eSATA External connectors to
support NCQ, Raid10, Raid0 and Raid1 !
RAID 0 (Striping), RAID 1 (Mirroring), RAID 0+1
(mirrored-stripping) and RAID 1+S (Mirrored-Sparing) improve the data performance and
provide the data redundancy and rebuilding. |
|
|
|
SATA II -3Gbps RAID External 4Ports 64bits PCI-X Host
|
| Item # |
64-101 |
| Price: |
$99.89 |
| Ship Weight: |
1 lb. |
| Color: |
Red |
| Form Factor |
Low Profile |
| Chip Set: |
|
| OS: Support: |
Linux, Windows NT 4.0, 2000 ,XP and 2003 Server |
| Driver: |
|
| FAQ: |
|
| In Stock: |
Yes |
| Compatibility: |
SATA II |
| Quantity Buy: |
Yes |
|
FEATURES:
- Four eSATA fully compliant External connectors on the card
- 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
1. PCI-X
- Compliant with PCI-X Specification, revision 1.0a
- Supports 133 MHz PCI-X with 64-bit data
- All registers appear in unified memory space
- Full-chip command completion status accessible with single PCI-X burst access
- I/O port access to register space
2. High Speed Serial ATA
- Fully compliant with Serial ATA 1.0a and Serial ATA II Extensions to Serial ATA 1.0a Specifications revision 1.1
- Hot-plug capability
- Supports Serial ATA Generation 2 transfer rate of 3.0 Gbps
- Supports First-party DMA commands for Native Command Queuing
- Plesiochronous, Single PLL architecture, 1 PLL for 4 ports
- Output Swing Control
- Supports four independent Serial ATA channels
- Independent Link, Transport, data FIFO, command fetch, scatter/gather, and command execution
- 31 Commands and Scatter/Gather Tables per Port
|
- Four Pin header on board for Device LED connection
- Protocol Override per Command
- Staggered Spin-up Control
- Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to multiple drives
- Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives
- RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring
- RAID 1+S (Mirrored-sparing) can automatically replace the failed drive and rebuild the system when booting HDD is failed
- Completely with drivers for Linux, Windows NT 4.0, 2000 ,XP and 2003 Server
|
|
